View DF16C-80DS-05V_1232261.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

0.5mm Pitch SMT Board to Board Connector
DF16 Series
Correspond to Automatic Mounting
The vacuum pick-up area is prepared for automatic mounting machine.
sFeatures
1. Miniaturizing and Slimming
In addition to 0.5mm pitch miniaturization, board to stacking height of 2mm and 2.5mm are prrovided.
Header Header
Receptacle commonly uses DF16#-*DS-0.5V.
Header Product Name Stacking Height 2.0mm 2.5mm
20.15
2.50.15
DF16#(2.0)-*DP-0.5V DF16#(2.5)-*DP-0.5V
Receptacle
Receptacle
Note1: The stacking height doesn't include the solder paste thickness.
2. High Contact Reliability
The bellows female contact has a sufficient spring characteristic despite the low profile, and achieves high contact reliability.
3. Click Sensitivity in Mating
The click feeling is considered to facilitate insertion check when the connector is mated.
4. Metal Fitting Available
The metal fitting to prevent the solder peel is provided, considering the mounting on FPC.
5. Corresponding to Automatic Mounting
The connector has the vacuum pick-up area, and enables the automatic mounting with the embossed tape packaging. Connector specification with no boss and no fitting is also.
sApplications
Mobile phone, LCD(Liquid Crystal Display), and so on
A308
sProduct Specifications
Rating Current rating : 0.3A Operating Temperature Range : -35 to +85c (Note 1) Storage Temperature Range : -10 to +60c (Note 2) Storage Humidity Range Condition 100V DC 150V AC/1 minute 100mA : 40 to 70% (Note 2) Voltage rating : 50V AC Operating Humidity Range : 40 to 80% Item 1. Insulation Resistance 2. Withstanding voltage 3. Contact Resistance 4. Vibration 6. Temperature Cycle 500M ohms min Specification
No flashover or insulation breakdown.
50m ohms max
No electrical discontinuity of 1s or more
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions.
5. Humidity (Steady state) Contact resistance: 50m ohms max.Insulation resistance:250M ohms min. 96 hours at temperature of 40c and humidity of 90% to 95% Contact resistance: 50m ohms max.:Insulation resistance: 500M ohms min. (-55c: 30 minutes 5 to 35c: 10 minutes (-85c: 30 minutes 5 to 35c: 10 minutes) 5 cycles 7. Durability (Mating/un-mating) Contact resistance: 50m ohms 8. Resistance to Soldering heat 50cycle
No deformation of components affecting performance.
Reflow: At the recommended temperature profile Manual soldering: 300c for 3 seconds
Note 1: Includes temperature rise caused by current flow. Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation.
sMaterial
Product Receptacle Part Insulator Contact Metal fitting Insulator Header Contact Metal fitting Material Polyamide resin Phosphor copper Brass Polyamide resin Phosphor copper Brass Treatment White Beige (Natural) Gold plated Tin-lead plated White Beige (Natural) Gold plated Tin-lead plated UL Standard UL94V-0 ------- ------- UL94V-0 ------- -------
sOrdering Information
Please determine the specific product. If needed, please select and order products from the product No. as listed on catalog page A310~A315.
qReceptacle/Header
DF16
q q Series Name w Type Fitting Blank A B C K Boss K K : DF16
# (**) - * DS - 0.5 V (**) * *
w e r t y u i e Product height Receptacle Header : None : 2.0, 2.5 V y Contact Pitch : 0.5mm u Contact Type : Straight SMT
r Number of Contacts (Note1) t Connector Type DS : Double-row receptacle DP : Double-row header
K
14, 16, 20, 30, 34, 40, 50, 60, 80 i Pakaging Type (81) : Gold plating, embossed tape packaging (80) : Gold plating, tube packaging

Note1: For the 14, 16 and 80 contacts connector, the stacking height 2.0mm product only is available. For the 34 contacts connectors, the stacking height of 2.5mm product only is available.
A309
sReceptacle
With metal fitting
0.5
5.8
7
0.2
1.95
3.8
1.5
2
0.65
O0.5
0.2
[Specific No.] -* *, (* *) (80) :Gold plated, tube packaging (81) :Gold plated, embossed tape packaging
qReceptacle with metal fitting, with boss
Part Number CL No. Number of Contacts 14 16 20 30 34 40 50 60 80 A 19.0 09.5 10.5 13.0 14.0 15.5 18.0 20.5 25.5 B 06.8 07.3 08.3 10.8 11.8 13.3 15.8 18.3 23.3 C 03.0 03.5 04.5 07.0 08.0 09.5 12.0 14.5 19.5 D 08.8 09.3 10.3 12.8 13.8 15.3 17.8 20.3 25.3 E 07.8 08.3 09.3 11.8 12.8 14.3 16.8 19.3 24.3 F 06.4 06.9 07.9 10.4 11.4 12.9 15.4 17.9 22.9 G 05.6 06.1 06.5 09.0 10.0 11.5 14.0 16.5 21.5 DF16-14DS-0.5V(**) 679-0010-1-** DF16-16DS-0.5V(**) 679-0001-0-** DF16-20DS-0.5V(**) 679-0002-3-** DF16-30DS-0.5V(**) 679-0003-6-** DF16-34DS-0.5V(**) 679-0009-2-** DF16-40DS-0.5V(**) 679-0004-9-** DF16-50DS-0.5V(**) 679-0005-1-** DF16-60DS-0.5V(**) 679-0006-4-** DF16-80DS-0.5V(**) 679-0008-0-**
Unit: mm Tube Packaging Quantity( pcs.) 54 pcs. 51 pcs. 46 pcs. 37 pcs. 35 pcs. 31 pcs. 27 pcs. 23 pcs. 19 pcs.
qReceptacle with metal fitting, without boss
Part Number CL No. Number of Contacts 14 16 20 30 34 40 50 60 80 A 09.0 09.5 10.5 13.0 14.0 15.5 18.0 20.5 25.5 B 06.8 07.3 08.3 10.8 11.8 13.3 15.8 18.3 23.3 C 03.0 03.5 04.5 07.0 08.0 09.5 12.0 14.5 19.5 D 08.8 09.3 10.3 12.8 13.8 15.3 17.8 20.3 25.3 E 07.8 08.3 09.3 11.8 12.8 14.3 16.8 19.3 24.3 F 06.4 06.9 07.9 10.4 11.4 12.9 15.4 17.9 22.9 G --- --- --- --- --- --- --- --- --- DF16B-14DS-0.5V(**) 679-0030-9-** DF16B-16DS-0.5V(**) 679-0021-8-** DF16B-20DS-0.5V(**) 679-0022-0-** DF16B-30DS-0.5V(**) 679-0023-3-** DF16B-34DS-0.5V(**) 679-0029-0-** DF16B-40DS-0.5V(**) 679-0024-6-** DF16B-50DS-0.5V(**) 679-0025-9-** DF16B-60DS-0.5V(**) 679-0026-1-** DF16B-80DS-0.5V(**) 679-0028-7-**
Unit: mm Tube Packaging Quantity( pcs.) 54 pcs. 51 pcs. 46 pcs. 37 pcs. 35 pcs. 31 pcs. 27 pcs. 23 pcs. 19 pcs.
A310
sReceptacle
Without metal fitting
O
[Specific No.] -* *, (* *) (80) :Gold plated, tube packaging (81) :Gold plated, embossed tape packaging
qReceptacle without metal fitting, with boss
Part Number CL No. Number of Contacts 14 16 20 30 34 40 50 60 80 A 09.0 09.5 10.5 13.0 14.0 15.5 18.0 20.5 25.5 B 06.8 07.3 08.3 10.8 11.8 13.3 15.8 18.3 23.3 C 03.0 03.5 04.5 07.0 08.0 09.5 12.0 14.5 19.5 G 05.6 06.1 06.5 09.0 10.0 11.5 14.0 16.5 21.5 DF16A-14DS-0.5V(**) 679-0020-5-** DF16A-16DS-0.5V(**) 679-0011-4-** DF16A-20DS-0.5V(**) 679-0012-7-** DF16A-30DS-0.5V(**) 679-0013-0-** DF16A-34DS-0.5V(**) 679-0019-6-** DF16A-40DS-0.5V(**) 679-0014-2-** DF16A-50DS-0.5V(**) 679-0015-5-** DF16A-60DS-0.5V(**) 679-0016-8-** DF16A-80DS-0.5V(**) 679-0018-3-**
Unit: mm Tube Packaging Quantity( pcs.) 54 pcs. 51 pcs. 46 pcs. 37 pcs. 35 pcs. 31 pcs. 27 pcs. 23 pcs. 19 pcs.
qReceptacle without metal fitting, without boss
Part Number CL No. Number of Contacts 14 16 20 30 34 40 50 60 80 A 09.0 09.5 10.5 13.0 14.0 15.5 18.0 20.5 25.5 B 06.8 07.3 08.3 10.8 11.8 13.3 15.8 18.3 23.3 C 03.0 03.5 04.5 07.0 08.0 09.5 12.0 14.5 19.5 G --- --- --- --- --- --- --- --- --- DF16C-14DS-0.5V(**) 679-0040-2-** DF16C-16DS-0.5V(**) 679-0031-1-** DF16C-20DS-0.5V(**) 679-0032-4-** DF16C-30DS-0.5V(**) 679-0033-7-** DF16C-34DS-0.5V(**) 679-0039-3-** DF16C-40DS-0.5V(**) 679-0034-0-** DF16C-50DS-0.5V(**) 679-0035-2-** DF16C-60DS-0.5V(**) 679-0036-5-** DF16C-80DS-0.5V(**) 679-0038-0-**
Unit: mm Tube Packaging Quantity( pcs.) 54 pcs. 51 pcs. 46 pcs. 37 pcs. 35 pcs. 31 pcs. 27 pcs. 23 pcs. 19 pcs.
A311
sBoard to Board 2mm Header
With metal fitting
O
[Specific No.] -* *, (* *) (80) :Gold plated, tube packaging (81) :Gold plated, embossed tape packaging
qBoard to Board 2mm Header with metal fitting, with boss
Part Number CL No. Number of Contacts 14 16 20 30 40 50 60 80 A 06.7 07.2 08.2 10.7 13.2 15.7 18.2 23.2 B 03.0 03.5 04.5 07.0 09.5 12.0 14.5 19.5 C 06.5 07.0 08.0 10.5 13.0 15.5 18.0 23.0 D 05.3 05.8 06.8 09.3 11.8 14.3 16.8 21.8 E 04.4 04.9 05.9 08.4 10.9 13.4 15.9 20.9 DF16(2.0)-14DP-0.5V(**) 679-0049-7-** DF16(2.0)-16DP-0.5V(**) 679-0041-5-** DF16(2.0)-20DP-0.5V(**) 679-0042-8-** DF16(2.0)-30DP-0.5V(**) 679-0043-0-** DF16(2.0)-40DP-0.5V(**) 679-0044-3-** DF16(2.0)-50DP-0.5V(**) 679-0045-6-** DF16(2.0)-60DP-0.5V(**) 679-0046-9-** DF16(2.0)-80DP-0.5V(**) 679-0048-4-**
Unit: mm Tube Packaging Quantity( pcs.) 73 pcs. 68 pcs. 59 pcs. 45 pcs. 37 pcs. 31 pcs. 26 pcs. 21 pcs.
qBoard to Board 2mm Header with metal fitting, without boss
Part Number CL No. Number of Contacts 14 16 20 30 40 50 60 80 A 06.7 07.2 08.2 10.7 13.2 15.7 18.2 23.2 B 03.0 03.5 04.5 07.0 09.5 12.0 14.5 19.5 C 06.5 07.0 08.0 10.5 13.0 15.5 18.0 23.0 D 05.3 05.8 06.8 09.3 11.8 14.3 16.8 21.8 E --- --- --- --- --- --- --- --- DF16B(2.0)-14DP-0.5V(**) 679-0069-4-** DF16B(2.0)-16DP-0.5V(**) 679-0061-2-** DF16B(2.0)-20DP-0.5V(**) 679-0062-5-** DF16B(2.0)-30DP-0.5V(**) 679-0063-8-** DF16B(2.0)-40DP-0.5V(**) 679-0064-0-** DF16B(2.0)-50DP-0.5V(**) 679-0065-3-** DF16B(2.0)-60DP-0.5V(**) 679-0066-6-** DF16B(2.0)-80DP-0.5V(**) 679-0068-1-**
Unit: mm Tube Packaging Quantity( pcs.) 73 pcs. 68 pcs. 59 pcs. 45 pcs. 37 pcs. 31 pcs. 26 pcs. 21 pcs.
A312
sBoard to Board 2mm Header
Without metal fitting
O
[Specific No.] -* *, (* *) (80) :Gold plated, tube packaging (81) :Gold plated, embossed tape packaging
qBoard to Board 2mm Header without metal fitting, with boss
Part Number CL No. Number of Contacts 14 16 20 30 40 50 60 80 A 06.7 07.2 08.2 10.7 13.2 15.7 18.2 23.2 B 03.0 03.5 04.5 07.0 09.5 12.0 14.5 19.5 E 04.4 04.9 05.9 08.4 10.9 13.4 15.9 20.9 DF16A(2.0)-14DP-0.5V(**) 679-0059-0-** DF16A(2.0)-16DP-0.5V(**) 679-0051-9-** DF16A(2.0)-20DP-0.5V(**) 679-0052-1-** DF16A(2.0)-30DP-0.5V(**) 679-0053-4-** DF16A(2.0)-40DP-0.5V(**) 679-0054-7-** DF16A(2.0)-50DP-0.5V(**) 679-0055-0-** DF16A(2.0)-60DP-0.5V(**) 679-0056-2-** DF16A(2.0)-80DP-0.5V(**) 679-0058-8-**
Unit: mm Tube Packaging Quantity( pcs.) 73 pcs. 68 pcs. 59 pcs. 45 pcs. 37 pcs. 31 pcs. 26 pcs. 21 pcs.
qBoard to Board 2mm Header without metal fitting, without boss
Part Number CL No. Number of Contacts 14 16 20 30 40 50 60 80 A 06.7 07.2 08.2 10.7 13.2 15.7 18.2 23.2 B 03.0 03.5 04.5 07.0 09.5 12.0 14.5 19.5 E --------------------------------DF16C(2.0)-14DP-0.5V(**) 679-0079-8-** DF16C(2.0)-16DP-0.5V(**) 679-0071-6-** DF16C(2.0)-20DP-0.5V(**) 679-0072-9-** DF16C(2.0)-30DP-0.5V(**) 679-0073-1-** DF16C(2.0)-40DP-0.5V(**) 679-0074-4-** DF16C(2.0)-50DP-0.5V(**) 679-0075-7-** DF16C(2.0)-60DP-0.5V(**) 679-0076-0-** DF16C(2.0)-80DP-0.5V(**) 679-0078-5-**
Unit: mm Tube Packaging Quantity( pcs.) 73 pcs. 68 pcs. 59 pcs. 45 pcs. 37 pcs. 31 pcs. 26 pcs. 21 pcs.
A313
sBoard to Board 2.5mm Header
With metal fitting
O
[Specific No.] -* *, (* *) (80) :Gold plated, tube packaging (81) :Gold plated, embossed tape packaging
qBoard to Board 2.5mm Header with metal fitting, with boss
Part Number CL No. Number of Contacts 20 30 34 40 50 60 A 08.2 10.7 11.7 13.2 15.7 18.2 B 04.5 07.0 08.0 09.5 12.0 14.5 C 08.0 10.5 11.5 13.0 15.5 18.0 D 06.8 09.3 10.3 11.8 14.3 16.8 E 05.9 08.4 09.4 10.9 13.4 15.9 DF16(2.5)-20DP-0.5V(**) 679-0082-2-** DF16(2.5)-30DP-0.5V(**) 679-0083-5-** DF16(2.5)-34DP-0.5V(**) 679-0089-1-** DF16(2.5)-40DP-0.5V(**) 679-0084-8-** DF16(2.5)-50DP-0.5V(**) 679-0085-0-** DF16(2.5)-60DP-0.5V(**) 679-0086-3-**
Unit: mm Tube Packaging Quantity( pcs.) 59 pcs. 45 pcs. 42 pcs. 37 pcs. 31 pcs. 26 pcs.
qBoard to Board 2.5mm Header with metal fitting, without boss
Part Number CL No. Number of Contacts 20 30 34 40 50 60 A 08.2 10.7 11.7 13.2 15.7 18.2 B 04.5 07.0 08.0 09.5 12.0 14.5 C 08.0 10.5 11.5 13.0 15.5 18.0 D 06.8 09.3 10.3 11.8 14.3 16.8 E ------------------------DF16B(2.5)-20DP-0.5V(**) 679-0102-8-** DF16B(2.5)-30DP-0.5V(**) 679-0103-0-** DF16B(2.5)-34DP-0.5V(**) 679-0109-7-** DF16B(2.5)-40DP-0.5V(**) 679-0104-3-** DF16B(2.5)-50DP-0.5V(**) 679-0105-6-** DF16B(2.5)-60DP-0.5V(**) 679-0106-9-**
Unit: mm Tube Packaging Quantity( pcs.) 59 pcs. 45 pcs. 42 pcs. 37 pcs. 31 pcs. 26 pcs.
A314
sBoard to Board 2.5mm Header
Without metal fitting
O
[Specific No.] -* *, (* *) (80) :Gold plated, tube packaging (81) :Gold plated, embossed tape packaging
qBoard to Board 2.5mm Header without metal fitting, with boss
Part Number CL No. Number of Contacts 20 30 34 40 50 60 A 08.2 10.7 11.7 13.2 15.7 18.2 B 04.5 07.0 08.0 09.5 12.0 14.5 E 05.9 08.4 09.4 10.9 13.4 15.9 DF16A(2.5)-20DP-0.5V(**) 679-0092-6-** DF16A(2.5)-30DP-0.5V(**) 679-0093-9-** DF16A(2.5)-34DP-0.5V(**) 679-0099-5-** DF16A(2.5)-40DP-0.5V(**) 679-0094-1-** DF16A(2.5)-50DP-0.5V(**) 679-0095-4-** DF16A(2.5)-60DP-0.5V(**) 679-0096-7-**
Unit: mm Tube Packaging Quantity( pcs.) 59 pcs. 45 pcs. 42 pcs. 37 pcs. 31 pcs. 26 pcs.
qBoard to Board 2.5mm Header without metal fitting, without boss
Part Number CL No. Number of Contacts 20 30 34 40 50 60 A 08.2 10.7 11.7 13.2 15.7 18.2 B 04.5 07.0 08.0 09.5 12.0 14.5 E ------------------------DF16C(2.5)-20DP-0.5V(**) 679-0112-1-** DF16C(2.5)-30DP-0.5V(**) 679-0113-4-** DF16C(2.5)-34DP-0.5V(**) 679-0119-0-** DF16C(2.5)-40DP-0.5V(**) 679-0114-7-** DF16C(2.5)-50DP-0.5V(**) 679-0115-0-** DF16C(2.5)-60DP-0.5V(**) 679-0116-2-**
Unit: mm Tube Packaging Quantity( pcs.) 59 pcs. 45 pcs. 42 pcs. 37 pcs. 31 pcs. 26 pcs.
A315
sRecommended PCB mounting pattern
qReceptacle
P=0.50.02 0.250.02 20.03
+0.1 0
M +0.1 0 N +0.1 0 C0.03
5.4 -0.1 +0.1 2.1 0
0
7.6
O0
.6 +0
0 .05
G0.03
2.7
(N o te 2)
Note1: If the pattern is included in the shaded area, and is not treated with resist, it could touch the connector contact. Note2: If the boss isn't included, the boss hole shown in the above isn't required. Number of Contacts 14 16 20 30 34 40 50 60 80 C 03.0 03.5 04.5 07.0 08.0 09.5 12.0 14.5 19.5 G 05.0 05.5 06.5 09.0 10.0 11.5 14.0 16.5 21.5 M 09.4 09.9 10.9 13.4 14.4 15.9 18.4 20.9 25.9 N 05.8 06.3 07.3 09.8 10.8 12.3 14.8 17.3 22.3
qHeader (Board to Board 2.0, 2.5mm)
G +0.1 0 0 H -0.1 B0.03 0.850.03
O0 .6
P=0.50.02 0.250.02
4.4 +0.1 0 0 2.2 -0.1
7
2.1
+0 . 0 05
+0.1 0
E0.03 K
(N ote
2)
Note1: If the pattern is included in the shaded area, and is not treated with resist, it could touch the connector contact . Note2: If the boss isn't included, the boss hole shown in the above isn't required. Note3: Don't install any part in the shaded area. If installed, the connectors can't be mated with each other. Number of Contacts 14 16 20 30 34 40 50 60 80 B 03.0 03.5 04.5 07.0 08.0 09.5 12.0 14.5 19.5 E 04.4 04.9 05.9 08.4 09.4 10.9 13.4 15.9 20.9 G 07.4 07.9 08.9 11.4 12.4 13.9 16.4 18.9 23.9 H 05.4 05.9 06.9 09.4 10.4 11.9 14.4 16.9 21.9 K 09.0 09.5 10.5 13.0 14.0 15.5 18.0 20.5 25.5
A316
sEmbossed Carrier Tape Dimensions
qReceptacle
12 0.1
1. 5
.1 +0 0
qReel Dimensions
20.5
0.1
4 0.1
Product name label
O2
1.75
1
2 0.1
0.
O1.5Lead hole depth
8
(O801)
0.1
0.2 3 O1
0.1
0.3
20.5 0.1 0.15L
Q
+2 0
0.3
.75 R0
.1 +00
qHeader
12 0.1 4 2 0.1
0.2 0.05
2.2
qReel Dimensions
20.5
Product name label
1.75 0.1 0.1
O2
1
0.
O1.5Lead hole depth
8
(O801)
0.1
0.2 3 O1
0.1
0.3
20.5
Q
+2 0
0.1
0.3
R0
.7
5
0.2
0.05
.1 +00
Product Name DF16#-14DS-0.5V DF16#-16DS-0.5V DF16#-20DS-0.5V DF16#-30DS-0.5V DF16#-34DS-0.5V DF16#-40DS-0.5V DF16#-50DS-0.5V DF16#-60DS-0.5V DF16#-80DS-0.5V DF16#(2.0)-14DP-0.5V DF16#(2.0)-16DP-0.5V DF16#(2.0)-34DP-0.5V DF16#(2.0/2.5)-20DP-0.5V DF16#(2.0/2.5)-30DP-0.5V DF16#(2.0/2.5)-40DP-0.5V DF16#(2.0/2.5)-50DP-0.5V DF16#(2.0/2.5)-60DP-0.5V DF16#(2.0/2.5)-80DP-0.5V
N 24.0 24.0 24.0 24.0 24.0 32.0 32.0 32.0 44.0 16.0 16.0 24.0 16.0 24.0 24.0 24.0 32.0 44.0
M --------------------28.4 28.4 28.4 40.4 ----------------------------28.4 40.4
2.0 1.9 2.5 2.4
0.15 0.15
L 11.5 11.5 11.5 11.5 11.5 14.2 14.2 14.2 20.2 07.5 07.5 11.5 07.5 11.5 11.5 11.5 14.2 20.2
Q 24.4 24.4 24.4 24.4 24.4 32.4 32.4 32.4 44.4 16.4 16.4 24.4 16.4 24.4 24.4 24.4 32.4 44.4
O3302
O3302
.75 R0
1. 5
1 0. +0
.1 +0 0
.1 +0 0
.75 R0
A317
BPrecautions
Temperature 250c IR reflow condition Preheating area 150c Soldering area 200c 30 to 90 seconds 235c5c 10 seconds max. 220c min. 10 to 20 seconds Max 240c 220c
150c
1. Recommended Temperature Profile (SMT)
100c 50c
Preheating area
Soldering area
0c 0SSEC 50SSEC 100SSEC 150SSEC 200SSEC Time
Note1: Maximun twice actions are allowed under the same condition. However, the interval between the first and second actions must be maintained at the room temperature. Note2: The temperature indicates the board surface temperature of the connector lead area. 2. Recommended Manual Soldering Condition (SMT) Soldering iron temperature: 29010c, Soldering time: Within 2 seconds 3. Recommended Screen Thickness (SMT) 0.15mm 4. Board Warp (SMT) 5. Cleaning Condition 6. Cautions Maximum 0.2mm in the connector center area, based on the both connector edges Refer to the "Nylon Connector Use Hand book". sThe header is designed in a structure where contacts are exposed. Touching it with bare hands would cause contact failure or electrostatic element damage. sWhere no board is mounted, the insertion or extraction will cause damage or contact deformation. sAvoid retaining the board with the connector only, and fix the board by any other means than the connector. sExcessive scoop insertion or extraction may result in damage. sIn the manual soldering process, don't carry out flux coating which will cause a flux blister on the connector. sThe color phase of this product may be slightly different from that of the formed product according to the manufacturing lot. However, the difference doesn't affect the performance.
A318

▲Up To Search▲

Price & Availability of DF16C-80DS-05V

	To Download DF16C-80DS-05V Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .